You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
Home > ThinkTel Support > Provisioning > How to update your SIP password on a Linksys/Cisco phone that is not connected with our provisioning server.
How to update your SIP password on a Linksys/Cisco phone that is not connected with our provisioning server.
print icon
  1. Log into your phones GUI(must be completed from a computer connected to the same network)
    a. Locate the Phones IP
         Press the options button on your phone and scroll down to the Network menu choice. Here you should find the phone's IP address on the local network.
    b. Go to your computer, open your web browser, and enter your phone's IP i.e. http://192.168.x.x replacing the x.x part with the IP address obtained from your phone.
  2. Click on Admin Login (Top right )
    a. You may be asked for
    User Name: admin
    Password: If you don't have please contact support. By email support@thinktel.ca or by phone at 866-928-4465 Options 1-3-1
  3. Click on the Ext 1
  4. Locate subscriber information.
    a. Change the Password to the one supplied
  5. Repeat as needed to other extensions
  6. Click on "Submit All Changes"

 

To reconnect to our provisioning server.

  1. Click on the advanced (Top right beside Admin Login)
  2. Click on the Provisioning Tab and ensure 'Provision Enable' is set to yes
    a. Set 'Resync Random Delay' to '0'
    b. Set 'Resync Periodic' to '5'
    c. Set 'Profile Rule' to: http://provision.thinktel.ca/init.cfg
  3. Click on 'Submit All Changes'

    Your Cisco/Linksys device will reboot up to four times with firmware potentially being upgraded if out of date.

     

Please note: It can take 10-20 minutes for your device to populate in our provisioning servers. If the process appears to be taking longer than this, the device may need to be manually rebooted by unplugging/replugging the power supply.

Feedback
0 out of 0 found this helpful

scroll to top icon